-40%

Cisco 2821 IOS 15.1 Advanced Enterprise 4 H/WIC cards Cables Rack Ears CCNA CCNP

$ 10.56

Availability: 100 in stock
  • All returns accepted: ReturnsNotAccepted
  • Number of LAN Ports: 2
  • MPN: CISCO2821
  • Brand: Cisco
  • Condition: Used
  • Type: Router
  • Interface: Ethernet (RJ-45)
  • Model: 2821
  • Network Management Type: Fully Managed
  • Product Line: Enterprise
  • Form Factor: Rack Mountable
  • Number of WAN Ports: 4
  • Network Connectivity: Wired-Ethernet (RJ-45)
  • Maximum LAN Data Rate: 1000 Mbps/1 Gbps

    Description

    For sale:
    Cisco 2821 IntegratedServices Router with Cisco IOS 15.1(4)M12a Advanced Enterprise (the licensewith the most features)
    Includes:
    ·
    4 Modules:
    ·
    HWIC-4ESW
    ·
    WIC-2T
    ·
    WIC-1T
    ·
    WIC-1DSU-T1-V2
    ·
    Rack ears and screws to mount it to the switch(the screws will be put into the rack ear screw hole slots to prevent them frombeing lost)
    ·
    Labeled 3’ Cisco DCE/DTE Serial Crossover Cable(blue)
    ·
    Labeled ~3’ T1 Crossover Cable (yellow)
    ·
    6’ AC Power Cord
    ·
    3 Labeled, Ethernet Cables
    ·
    10' (Black)
    ·
    3' (Gray)
    ·
    1' (Light Blue)
    It has been reset to thedefault condition and is immediately accessible from a terminal emulator.
    Has normal wear and tear asseen in pictures but nothing major. Full functionality.
    *IOS DUMPS AT THEBOTTOM*
    SPECS
    General:
    ·
    Status Indicators - Power, link/activity
    ·
    Encryption Algorithm - DES, Triple DES, AES
    ·
    Manufacturer -Cisco
    Power:
    ·
    Nominal Voltage - AC 120/230 V
    ·
    Frequency Required - 47 - 63 Hz
    ·
    Type - internal power supply
    Networking:
    ·
    Connectivity Technology - wired
    ·
    Data Link Protocol - Ethernet, Fast Ethernet,Gigabit Ethernet
    ·
    Network / Transport Protocol - IPSec
    ·
    Features - MPLS support, URL filtering, VPNsupport, firewall protection, hardware encryption, power over Ethernet (PoE)
    ·
    Compliant Standards - IEEE 802.3af
    ·
    Remote Management Protocol - SNMP 3
    Miscellaneous:
    ·
    Height (Rack Units) – 2U
    Interface Provided:
    ·
    USB
    ·
    Ethernet 10Base-T/100Base-TX/1000Base-T
    ·
    2 1000Base-T
    ·
    4 100Base-T from HWIC card
    ·
    Auxiliary
    ·
    Console
    Memory:
    ·
    RAM
    ·
    Installed Size - 256 MB
    ·
    Max Supported Size - 1 GB
    ·
    Flash Memory
    ·
    Installed Size – 128 MB
    ·
    Max Supported Size - 256 MB
    Software:
    ·
    Cisco IOS 15.1(4)M12a Advanced Enterprise
    Environmental Parameters:
    ·
    Min Operating Temperature - 32 °F
    ·
    Max Operating Temperature - 104 °F
    ·
    Humidity Range Operating - 5 - 95%
    Misc:
    ·
    Brand - Cisco
    ·
    Model - 2821
    ·
    Packaged Quantity - 1
    ·
    Dimensions & Weight
    ·
    Width - 17.2 in
    ·
    Depth - 16.4 in
    ·
    Height -3.5 in
    ·
    Weight - 5.13 lbs
    IOS Dumps:
    Router#show version
    Cisco IOS Software, 2800Software (C2800NM-ADVENTERPRISEK9_IVS-M), Version 15.1(4)M12a, RELEASE SOFTWARE(fc1)
    Copyright (c) 1986-2016 byCisco Systems, Inc.
    Compiled Tue 04-Oct-16 03:37by prod_rel_team
    ROM: System Bootstrap,Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
    Router uptime is 1 hour, 12minutes
    System returned to ROM bypower-on
    System image file is"flash:c2800nm-adventerprisek9_ivs-mz.151-4.M12a.bin"
    Last reload type: NormalReload
    This product containscryptographic features and is subject to United
    States and local country lawsgoverning import, export, transfer and
    use. Delivery of Ciscocryptographic products does not imply
    third-party authority toimport, export, distribute or use encryption.
    Importers, exporters,distributors and users are responsible for
    compliance with U.S. andlocal country laws. By using this product you
    agree to comply withapplicable laws and regulations. If you are unable
    to comply with U.S. and locallaws, return this product immediately.
    Cisco 2821 (revision 1.0)with 509952K/14336K bytes of memory.
    Processor board IDFTX1203A183
    4 FastEthernet interfaces
    2 Gigabit Ethernet interfaces
    1 Serial interface
    3 Serial(sync/async)interfaces
    1 Virtual Private Network(VPN) Module
    DRAM configuration is 64 bitswide with parity enabled.
    239K bytes of non-volatileconfiguration memory.
    126976K bytes of ATACompactFlash (Read/Write)
    License Info:
    License UDI:
    -------------------------------------------------
    Device#
    PID
    SN
    -------------------------------------------------
    *0
    CISCO2821
    FTX1203A183
    Configuration register is0x2102
    Router #show platform
    2821 Network IO InterruptThrottling:
    throttle count=0, timer count=0
    throttle counts= 0 0 0 0 0
    active=0, configured=1
    netint usec=20000, netint mask usec=1000
    real netint usec=4000, real netint maskusec=200
    IO Mask is F300
    Per Slot Intr Mask is F300
    2821 Backplane EEPROM:
    PCB Serial Number
    : FOC11515Y1L
    Hardware Revision
    : 1.0
    Top Assy. Part Number
    : 800-26921-03
    Board Revision
    : A0
    Deviation Number
    : 0
    Fab Version
    : 03
    RMA Test History
    : 00
    RMA Number
    : 0-0-0-0
    RMA History
    : 00
    Processor type
    : 87
    Hardware date code
    :20071222
    Chassis Serial Number
    : FTX1203A183
    Chassis MAC Address
    : 001e.be02.c280
    MAC Address block size
    : 32
    CLEI Code
    : COM7M00ARA
    Product (FRU) Number
    : CISCO2821
    Part Number
    : 73-8853-05
    Version Identifier
    : V04
    EEPROM format version 4
    Dimm 0 SPD data :
    Size of dimm
    = 512 Megabytes
    Memory Type
    = 0x7
    Row Addresses
    = 0xD
    Column Address
    = 0xA
    Module Rows
    = 0x2
    Data Width
    = 0x48
    Voltage Interface
    = 0x4
    Cycle Time
    = 0x75
    Access Time
    = 0x75
    Configuration Type
    = 0x2
    Refresh Rate/Type
    = 0x82
    Primary Width
    = 0x8
    Error Width
    = 0x8
    Minimum Clock Delay
    = 0x1
    Burst Lengths
    = 0xE
    Number of Banks
    = 0x4
    Cas Latencies
    = 0xC
    Write Latency
    = 0x2
    Module Attributes
    = 0x20
    General Attributes
    = 0xC0
    Min Cycle Time, CAS of 2
    = 0xA0
    Access Clock Cycle, CAS of 2= 0x75
    Min Cycle Time, CAS of 1
    = 0x0
    Access Clock Cycle, CAS of 2= 0x0
    Row Precharge
    = 0x50
    Row Active to Row Active
    = 0x3C
    RAS CAS Delay
    = 0x50
    Ras Pulse Width
    = 0x2D
    Row Density
    = 0x40
    Vendor Id
    = 7F94FFFFFFFFFFFF
    Module Part Number
    = SG5726485D8D6CHSJ0
    Module Revision Code
    = 00FF
    Dimm 1 SPD data :
    Memory Slot Empty
    System RTC device
    = DS1337
    Router#show inventory
    NAME: "2821chassis", DESCR: "2821 chassis"
    PID: CISCO2821
    , VID: V04 , SN: FTX1203A183
    NAME: "WAN InterfaceCard - Serial (1T) on Slot 0 SubSlot 0", DESCR: "WAN Interface Card -Serial (1T)"
    PID: WIC-1T=
    , VID: 1.0, SN: 36967218
    NAME: "4 Port FE Switchon Slot 0 SubSlot 1", DESCR: "4 Port FE Switch"
    PID: HWIC-4ESW
    , VID: VN/A, SN: FOC09433TVK
    NAME: "WAN InterfaceCard - DSU/CSU T1 Fractional (V2) on Slot 0 SubSlot 2", DESCR: "WANInterface Card - DSU/CSU T1 Fractional (V2)"
    PID: WIC-1DSU-T1-V2
    , VID: 1.2, SN: FOC10080FCN
    NAME: "WAN InterfaceCard - Serial 2T on Slot 0 SubSlot 3", DESCR: "WAN Interface Card -Serial 2T"
    PID: WIC-2T=
    , VID: 1.0, SN: 24967880
    Router#show environment
    Main Power Supply is AC
    Fan 1 OK
    Fan 2 OK
    Fan 3 OK
    Fan Speed Setting: Normal
    System Temperature: 29Celsius (normal)
    Environmental informationlast updated 00:00:06 ago
    Router# show running-config
    Building configuration...
    Current configuration : 1372bytes
    !
    version 15.1
    service timestamps debugdatetime msec
    service timestamps log datetimemsec
    no servicepassword-encryption
    !
    hostname Router
    !
    boot-start-marker
    boot-end-marker
    !
    !
    !
    no aaa new-model
    !
    !
    dot11 syslog
    ip source-route
    !
    !
    ip cef
    !
    !
    !
    no ipv6 cef
    !
    multilink bundle-nameauthenticated
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    voice-card 0
    !
    crypto pki token defaultremoval timeout 0
    !
    !
    !
    !
    license udi pid CISCO2821 snFTX1203A183
    !
    redundancy
    !
    !
    !
    !
    !
    !
    !
    !
    !
    !
    interface GigabitEthernet0/0
    no ip address
    shutdown
    duplex auto
    speed auto
    !
    interface GigabitEthernet0/1
    no ip address
    shutdown
    duplex auto
    speed auto
    !
    interface Serial0/0/0
    no ip address
    shutdown
    no fair-queue
    clock rate 2000000
    !
    interface Serial0/2/0
    no ip address
    shutdown
    !
    interface Serial0/3/0
    no ip address
    shutdown
    clock rate 2000000
    !
    interface Serial0/3/1
    no ip address
    shutdown
    clock rate 2000000
    !
    interface FastEthernet0/1/0
    no ip address
    !
    interface FastEthernet0/1/1
    no ip address
    !
    interface FastEthernet0/1/2
    no ip address
    !
    interface FastEthernet0/1/3
    no ip address
    !
    interface Vlan1
    no ip address
    !
    ip forward-protocol nd
    no ip http server
    no ip http secure-server
    !
    !
    !
    !
    !
    !
    !
    !
    !
    control-plane
    !
    !
    !
    !
    mgcp profile default
    !
    !
    !
    !
    !
    gatekeeper
    shutdown
    !
    !
    !
    line con 0
    line aux 0
    line vty 0 4
    login
    transport input all
    !
    scheduler allocate 20000 1000
    end